HEATERS-Intake manifold heater inlet tube - 10 cyl. 6.8L-F250SD/550SD

PRESS IN HEATER HOSE FITTING WITH 1/4" FITTING ON THE SIDE.

THIS PART PRESSES INTO THE FRONT RIGHT MANIFOLD NEXT TO THERM. HOUSING AND HAS ONE NIPPLE FOR HEATER INLET HOSE

COUPLING ON FRONT PASSENGER SIDE CYLINDER HEAD.

NIPPLE EXITING WATER PUMP. O-RING IS 1825293C1.

NIPPLE EXITING FRONT PASSENGER SIDE CYLINDER HEAD.

Снято с производства

#3C34 8K528-AA - (NAVISTAR NO. 1838419C1)

Снято с производства

"45 DEG. " - 3/8'' - 18 - 5/8'' HOSE CONNECTION

Снято с производства

BREATHER HOSE CLAMP

CLEAN AIR HOSE INLET TO TURBO - (NAVISTAR ID 274090R91)

EGR COOLER TO EXHAUST PIPE

INLET FROM EXHAUST SYSTEM TO TURBO; 100MM V STYLE CLAMP

2 1/2'' WORM CLAMP; ATTACHES TURBO AIR OUTLETS FROM "Y" ADAPTOR TO CYLINDER HEAD INLET.

3 1/2 INCH CLAMP - #397257-R1 - CLAMP FOR MOUNTING THE 6C640 TURBO MANIFOLD HOSES

3 1/2" CLAMP. AIR INLET HOSE TO TURBO INLET 2 REQUIRED. (1 PER PACKAGE)

NAVISTAR #1824400-C1, FORD #F81A 8287-EA - INLET TO EXHAUST SYSTEM - ATTACHES 6K682(TURBO) TO 6K854(ADAPTOR) - PKG OF 1

V-BAND TURBO OUTLET CLAMP FROM TURBO TO 6K889

LOWER

UPPER

KIT-INTAKE MANIFOLD AND RELATED PARTS

KIT-INTAKE MANIFOLD AND RELATED PARTS

KIT_INTAKE MANIFOLD, GASKETS, AND RELATED REPAIR PARTS.#1840774-C91

(AB-175-HY)SCREW/WASHER M6X1.0 X 35.5MM (ATTACH 9A589 SPACER TO UPPER INTAKE MANIFOLD & THROTTLE BODY 9E926 TO SPACER 9A589)

(AB-208-AX)SCREW/WSHR M6 X 1.0 X 42.5 HEX HD. PILOT (ATTACH UPPER/LOWER INTAKE MANIFOLD).

BOLT; M6 X 25MM

BOLT; M6 X 95MM

STUD; M6 X 95MM

ATTACHES WITH E9ZZ-8287-AA CLAMP TO 18599 CONNECTOR TO 9424 UPPER INTAKE MANIFOLD