8 CYL. 6.0L - DIESEL-Fuel filter & related parts

O-RING UNDER FUEL FILTER HOUSING

O'RING-ENGINE FUEL FILTER CAP. #1837865-C1. 72MM X 3MM. ALSO SERVICED IN 9N184/9C165/9G270

O-RING-FRAME RAIL MOUNTED FUEL PUMP 9G282 ELEMENT 9N184 CAP 9G270. ALSO SERVICED IN 9G270/9N184/9A343/9G282. 91MM X 4MM

#1838630-C1. GASKET-FUEL PRESSURE REGULATOR. ALSO SERVICED IN 9C165/9T517. HARP SHAPE. ATTACH TO 9C166

CONTAINS O-RINGS AND HARDWARE AS SHOWN IN ILLUSTRATION.

REPLACEMENT PART MAY DIFFER FROM ORIGINAL REMOVE PLASTIC SEAT ON REGULATOR FOR USE ON NEW PART; MOUNTING BOLTS ARE W300045 (M8 X 75). NOTE: LINES TO CYL HEADS & FRAME CONNECT TO HOUSING USING 9N320 FITTINGS.

HOUSING-COMBINED OIL/FUEL FILTER. REQUIRES SUPPLY TUBE 9B273 (CENTER TUBE CONNECTS TO SIDE OF 9C166)WITH BANJO END CONNECTOR TO 9C166 HOUSING

ALSO SERVICED IN 9275. USED ON THIRD TUBE PORT(AUX GENERATOR TUBE) AS A END CAP

CAP; LOCATED ON ENGINE FUEL FILTER HOUSING. INCLUDES 9364 GASKET(ROUND 72MM X 3MM)

KIT-CAP WITH O'RING 9364 FOR FRAME MOUNTED FUEL PUMP ELEMENT/HOUSING. ALSO SERVICED IN 9G282 FRAME RAIL MOUNTED FUEL PUMP ASY. O'RING ALSO SERVICED IN KITS 9364/9N184/9A343.

PLUG; M17 X 16MM; HIGH PRESSURE OIL PUMP, FUEL FILTER & FUEL RAIL. INCLUDES O'RING 9N693. #1837644-C91.

O-RING FOR PLUG

KIT CONTAINS 2 FILTERS. ENGINE MOUNTED FILTER & FRAME MOUNTED FILTER. O-RINGS ARE INCLUDED IN KIT.

M12; INCLUDES O'RINGS W301333 & W301638

M16; INCLUDES O'RINGS W301321 & W301592

16MM OD X 2MM THICK. ALSO SERVICED IN 6N853 OIL TUBE CONNECTOR AND WITH 9K024 PLUG

16MM OD X 2MM THICK.

16MM OD X 2MM THICK.

(3) 2.1 INCHES IN DIA. ALSO SERVICED IN 9P458 ASSY.

(2) 34MM OD X 5MM THICK. ALSO SERVICED IN 9P458 ASSY.

#1835339-C1. 22MM OD X 2MM THICK. ALSO SERVICED IN ENGINE HIGH PRESSURE PUMP KIT 9G804

#1835350-C1. 21MM OD X 4MM THICK. ALSO SERVICED IN ENGINE HIGH PRESSURE PUMP KIT 9G804

#1836505-C1. 11MM OD X 2MM THICK. O-RING FOR CAM POSITION SENSOR

#1837799-C1. 14MM OD X 2MM THICK. O-RING FOR ECT AND EOP SENSOR

#1837800-C1. 14MM OD X 2MM THICK. O-RING FOR ICP SENSOR

#1837803-C1. 18MM OD X 2MM THICK. O-RING FOR MANIFOLD AIR TEMP. SENSOR

#1837889-C1. 10MM OD X 2MM THICK. O-RING FOR CAM POSITION SENSOR

(1) 16MM OD X 2MM THICK. ALSO SERVICED IN DIAGNOSTIC VALVE 6K702 IN OIL COOLER

(4) COMPLETE SEAL KIT THAT ALSO COMES WITH OIL COOLER ASY. CONTAINS ALL SEALS REQUIRED TO R&R OIL COOLER.

14MM OD X 2MM THICK. O-RING FOR PLUG ON FUEL FILTER HOUSING. ALSO USED IN HIGH PRESSURE PUMP COVER.

SEAL FOR 9K024 ON H/P PUMP COVER

SEAL INSIDE FUEL FILTER HOUSING BETWEEN 9T289 & 9C166.

O'RING. M16. ALSO SERVICED IN 3C3Z-9N320-AA (ATTACH TO ENGINE FUEL FILTER HOUSING)