HEATERS-Intake manifold heater inlet tube - 10 cyl. 6.8L-L1

NIPPLE EXITING WATER PUMP. O-RING IS 1825293C1.

3~8" HOSE NIPPLE ON FRONT RH AND BACK LH CYLINDER HEAD.

Снято с производства

ELBOW CONNECTING TO HEATER CORE.

ELBOW CONNECTING TO HEATER CORE.

ELBOW ON FRONT RH & REAR LH CYLINDER HEAD.

HEATER HOSE

PRESS IN HEATER HOSE FITTING WITH 1/4" FITTING ON THE SIDE.

THIS PART PRESSES INTO THE FRONT RIGHT MANIFOLD NEXT TO THERM. HOUSING AND HAS ONE NIPPLE FOR HEATER INLET HOSE

#3C34 8K528-AA - (NAVISTAR NO. 1838419C1)

Снято с производства

"45 DEG. " - 3/8'' - 18 - 5/8'' HOSE CONNECTION

Снято с производства

USED TO ATTACH HEATER HOSES TO HEATER CORE.

USED TO ATTACH HEATER HOSES TO HEATER CORE.

USED TO ATTACH HEATER HOSES TO HEATER CORE.

USED TO ATTACH HEATER HOSES TO HEATER CORE.

BREATHER HOSE CLAMP

CLEAN AIR HOSE INLET TO TURBO - (NAVISTAR ID 274090R91)

EGR COOLER TO EXHAUST PIPE

INLET FROM EXHAUST SYSTEM TO TURBO; 100MM V STYLE CLAMP

NAVISTAR #1824400-C1, FORD #F81A 8287-EA - INLET TO EXHAUST SYSTEM - ATTACHES 6K682(TURBO) TO 6K854(ADAPTOR) - PKG OF 1

USED TO ATTACH HEATER HOSES TO HEATER CORE.

USED TO ATTACH HEATER HOSES TO HEATER CORE.

UPPER. BLUE GASKET(NOT SERVICED SEPARATELY). INCLUDES HEATER INLET TUBE 18599

UPPER

LOWER. INCLUDES 9461 GASKETS

INCLUDES 8C368 CROSSOVER WITH SMALL WATER FITTING FOR HEATED THROTTLE BODY

KIT-INTAKE MANIFOLD AND RELATED PARTS

KIT-INTAKE MANIFOLD AND RELATED PARTS. # 1845151-C91

BOLT; M6 X 25MM

BOLT; M6 X 95MM

STUD; M6 X 95MM