8-цил. 5,0 л — бензин — Выпускной коллектор

RH

Снято с производства

RH

RH; TUBULAR DESIGN. USED WITH CYLINDER HEAD WHICH HAS "INTERNAL EGR SYSTEM".

RH; TUBULAR DESIGN. REQUIRES CAP N807040-S2 WHEN USING IN PLACE OF F67Z-9430-CA (WITHOUT EGR BOSS). USE ONLY WITH F67Z-9431-BA TUBULAR LH MANIFOLD.

Снято с производства

LH

Снято с производства

LH

LH; TUBULAR DESIGN.

Снято с производства

ONE PACKAGE CONSISTS OF 2 PIECES

Снято с производства

ONE PACKAGE CONSISTS OF 2 PIECES

ONE PACKAGE CONSISTS OF 1 PIECE

(AB-118-GL)-BOLT (EXH MANIFOLD TO CYL HEAD, 4 EA R.H./L.H.) - M8 X 75MM HEX FLANGE HEAD

(AB-118-GL)-BOLT (EXH MANIFOLD TO CYL HEAD, 4 EA R.H./L.H.) - M8 X 75MM HEX FLANGE HEAD

Снято с производства

(AM-152-M)-NUT M8 HEX FLANGE HIGH TEMP (EXH. MANIFOLD -MOUNTING STUD W701868-S300.

(AW-93-J)-STUD (EXH. MANIFOLD TO CYL. HEAD, 2 EA RH AND LH) M8 X 13 + M8 X 37 FLAT DRIVE

(AM-152-M)-NUT M8 HEX FLANGE HIGH TEMP (EXH. MANIFOLD -MOUNTING STUD W701868-S300.

(AW-93-J)-STUD (EXH. MANIFOLD TO CYL. HEAD, 2 EA RH AND LH) M8 X 13 + M8 X 37 FLAT DRIVE

SPACER; INSTALL ON THE UPPER/REAR STUD ON BOTH SIDES PRIOR TO INSTALLATION OF MANIFOLD AS A LOCATOR TO ENSURE PROPER ALIGNMENT.

BOLT; 3/8" X 1". FOR TUBULAR MANIFOLD ONLY.

STUD; 3/8" X 1 1/8" X 3/8" X 3/4". FOR TUBULAR MANIFOLD ONLY.