8 CYL. 6.0L - DIESEL-Fuel injectors & rails - ""From 9/29/03''

10 O-RINGS PER KIT

FUEL REGULATOR O-RING KIT. FOR O-RING KIT WITH IPR SCREEN USE 3C3Z-9H529-A.

INJECTOR O-RING KIT

STAND PIPE ASY; HP PUMP TO FUEL RAIL. 200MM LONG

STAND PIPE ASY; HP PUMP TO FUEL RAIL. 2 PIECE DESIGN. NOW REPLACED BY 1 PIECE DESIGN 5C3Z-9A332-A. (W301387 MUST BE REMOVED FROM FUEL RAIL TO INSTALL UPDATED PART)

ONE PACKAGE CONSISTS OF 8 PIECES. ONE PIECE REQUIRED PER INJECTOR.EIGHT(8) PIECES REQUIRED PER ENGINE

INTL# 1843089-C95 (OEM). SERVICED THROUGH FAD(USA) AND PDC'S(CANADA)

REMANUFACTURED

SLEEVE; FUEL INJECTOR. ONE(1) PACKAGE CONSISTS OF 4 PIECES.EIGHT(8) PIECES REQUIRED PER ENGINE.ONE(1) REQUIRED PER INJECTOR.

ICP REGUALTOR. #1845274-C91. INCLUDES O'RING 3C3Z-9N693-GA. SEAL # IS W301385.

ICP REGUALTOR. #1845428-C91. W301385 IS THE SEAL FOR THE SENSOR.

BRANCH TUBE; 45MM BOLT IS W300015. FOR SEAL BETWEEN 9T288 AND 9J332; USE 3C3Z-9C064-AA

INTL# 1844694-C92. WISHBONE DESIGN BETWEEN OIL RAIL

PLUG; M17 X 16MM; HIGH PRESSURE OIL PUMP, FUEL FILTER & FUEL RAIL. INCLUDES O'RING 9N693. #1837644-C91.

SEAL FOR 9K024 ON H/P PUMP COVER

O-RING FOR PLUG

16MM OD X 2MM THICK. ALSO SERVICED IN 6N853 OIL TUBE CONNECTOR AND WITH 9K024 PLUG

16MM OD X 2MM THICK.

16MM OD X 2MM THICK.

(3) 2.1 INCHES IN DIA. ALSO SERVICED IN 9P458 ASSY.

(2) 34MM OD X 5MM THICK. ALSO SERVICED IN 9P458 ASSY.

#1835339-C1. 22MM OD X 2MM THICK. ALSO SERVICED IN ENGINE HIGH PRESSURE PUMP KIT 9G804

#1835350-C1. 21MM OD X 4MM THICK. ALSO SERVICED IN ENGINE HIGH PRESSURE PUMP KIT 9G804

#1836505-C1. 11MM OD X 2MM THICK. O-RING FOR CAM POSITION SENSOR

#1837799-C1. 14MM OD X 2MM THICK. O-RING FOR ECT AND EOP SENSOR

#1837800-C1. 14MM OD X 2MM THICK. O-RING FOR ICP SENSOR

#1837803-C1. 18MM OD X 2MM THICK. O-RING FOR MANIFOLD AIR TEMP. SENSOR

#1837889-C1. 10MM OD X 2MM THICK. O-RING FOR CAM POSITION SENSOR

(1) 16MM OD X 2MM THICK. ALSO SERVICED IN DIAGNOSTIC VALVE 6K702 IN OIL COOLER

(4) COMPLETE SEAL KIT THAT ALSO COMES WITH OIL COOLER ASY. CONTAINS ALL SEALS REQUIRED TO R&R OIL COOLER.

14MM OD X 2MM THICK. O-RING FOR PLUG ON FUEL FILTER HOUSING. ALSO USED IN HIGH PRESSURE PUMP COVER.

SEAL INSIDE FUEL FILTER HOUSING BETWEEN 9T289 & 9C166.

O'RING. M16. ALSO SERVICED IN 3C3Z-9N320-AA (ATTACH TO ENGINE FUEL FILTER HOUSING)

INCLUDES FUEL RAIL, 6N853 CHECK VALVE, PLUGS W300090 AND W300091. ATTACHING BOLT IS W300014

REMANUFACTURED OIL RAIL ASSEMBLY. ATTACHING BOLT IS W301383

ALSO SERVICED IN 9J332(WISHBONE STYLE HOSE ASSEMBLY).INTL# 1844252-C1. BUSHING WITHOUT THE 9J278 RETAINER

BUSHING WITH RETAINER 9J278. ALSO SERVICED IN 9J332

20MM LONG

22MM LONG

NAV ID# 1847074-C91