HEATERS-Intake manifold heater inlet tube - 10 cyl. 6.8L-F250SD/550SD

ELBOW ON FRONT PASSENGER SIDE CYLINDER HEAD.

PRESS IN HEATER HOSE FITTING WITH 1/4" FITTING ON THE SIDE.

SCREWS INTO THE INTAKE MANIFOLD NEAR THE THERMOSTAT HOUSING. HAS 1 NIPPLE TO ATTACH TO THE 8A505.

SCREWS INTO THE INTAKE MANIFOLD NEAR THE THERMOSTAT HOUSING. HAS 1 NIPPLE TO ATTACH TO THE 8A505.

THIS PART PRESSES INTO THE FRONT RIGHT MANIFOLD NEXT TO THERM. HOUSING AND HAS ONE NIPPLE FOR HEATER INLET HOSE

NIPPLE EXITING WATER PUMP. O-RING IS 1825293C1.

FLOW RESTRICTOR - HEATER HOSE

NIPPLE EXITING FRONT PASSENGER SIDE CYLINDER HEAD.

Снято с производства

#3C34 8K528-AA - (NAVISTAR NO. 1838419C1)

Снято с производства

"45 DEG. " - 3/8'' - 18 - 5/8'' HOSE CONNECTION

Снято с производства

BREATHER HOSE CLAMP

CLEAN AIR HOSE INLET TO TURBO - (NAVISTAR ID 274090R91)

EGR COOLER TO EXHAUST PIPE

INLET FROM EXHAUST SYSTEM TO TURBO; 100MM V STYLE CLAMP

2 1/2'' WORM CLAMP; ATTACHES TURBO AIR OUTLETS FROM "Y" ADAPTOR TO CYLINDER HEAD INLET.

3 1/2 INCH CLAMP - #397257-R1 - CLAMP FOR MOUNTING THE 6C640 TURBO MANIFOLD HOSES

NAVISTAR #1824400-C1, FORD #F81A 8287-EA - INLET TO EXHAUST SYSTEM - ATTACHES 6K682(TURBO) TO 6K854(ADAPTOR) - PKG OF 1

V-BAND TURBO OUTLET CLAMP FROM TURBO TO 6K889

UPPER

LOWER. INCLUDES 9461 GASKETS

INCLUDES 8C368 CROSSOVER WITH SMALL WATER FITTING FOR HEATED THROTTLE BODY

HOLLOW STUDBOLT THAT THREADS ONTO VALVE COVER STUD

KIT-INTAKE MANIFOLD AND RELATED PARTS

KIT-INTAKE MANIFOLD AND RELATED PARTS. # 1845151-C91

(AB-175-HY)SCREW/WASHER M6X1.0 X 35.5MM (ATTACH 9A589 SPACER TO UPPER INTAKE MANIFOLD & THROTTLE BODY 9E926 TO SPACER 9A589)

(AB-208-AX)SCREW/WSHR M6 X 1.0 X 42.5 HEX HD. PILOT (ATTACH UPPER/LOWER INTAKE MANIFOLD).

(AB-175-HY)SCREW/WASHER M6X1.0 X 35.5MM (ATTACH 9A589 SPACER TO UPPER INTAKE MANIFOLD & THROTTLE BODY 9E926 TO SPACER 9A589)

(AB-208-AX)SCREW/WSHR M6 X 1.0 X 42.5 HEX HD. PILOT (ATTACH UPPER/LOWER INTAKE MANIFOLD).

BOLT; M8 X 43MM; ATTACHES INTAKE MANIFOLD TO CYLINDER HEAD.

M8 X 56MM (ATTACHES INTAKE MANIFOLD TO CYLINDER HEAD.

M8 X 55MM; ATTACHES INTAKE MANIFOLD TO CYLINDER HEAD.

BOLT; M6 X 25MM

BOLT; M6 X 95MM

STUD; M6 X 95MM