HEATERS-Intake manifold heater inlet tube - 10 cyl. 6.8L-F250SD/550SD

ELBOW ON FRONT PASSENGER SIDE CYLINDER HEAD.

PRESS IN HEATER HOSE FITTING WITH 1/4" FITTING ON THE SIDE.

SCREWS INTO THE INTAKE MANIFOLD NEAR THE THERMOSTAT HOUSING. HAS 1 NIPPLE TO ATTACH TO THE 8A505.

SCREWS INTO THE INTAKE MANIFOLD NEAR THE THERMOSTAT HOUSING. HAS 1 NIPPLE TO ATTACH TO THE 8A505.

THIS PART PRESSES INTO THE FRONT RIGHT MANIFOLD NEXT TO THERM. HOUSING AND HAS ONE NIPPLE FOR HEATER INLET HOSE

NIPPLE EXITING WATER PUMP. O-RING IS 1825293C1.

FLOW RESTRICTOR - HEATER HOSE

NIPPLE EXITING FRONT PASSENGER SIDE CYLINDER HEAD.

Снято с производства

"45 DEG. " - 3/8'' - 18 - 5/8'' HOSE CONNECTION

Снято с производства

2 1/2'' WORM CLAMP; ATTACHES TURBO AIR OUTLETS FROM "Y" ADAPTOR TO CYLINDER HEAD INLET.

3 1/2 INCH CLAMP - #397257-R1 - CLAMP FOR MOUNTING THE 6C640 TURBO MANIFOLD HOSES

3 1/2" CLAMP. AIR INLET HOSE TO TURBO INLET 2 REQUIRED. (1 PER PACKAGE)

NAVISTAR #1824400-C1, FORD #F81A 8287-EA - INLET TO EXHAUST SYSTEM - ATTACHES 6K682(TURBO) TO 6K854(ADAPTOR) - PKG OF 1

V-BAND TURBO OUTLET CLAMP FROM TURBO TO 6K889

LOWER

UPPER. BLUE GASKET(NOT SERVICED SEPARATELY). INCLUDES HEATER INLET TUBE 18599

INCLUDES VALLEY STUFFER 6P013

(AB-175-HY)SCREW/WASHER M6X1.0 X 35.5MM (ATTACH 9A589 SPACER TO UPPER INTAKE MANIFOLD & THROTTLE BODY 9E926 TO SPACER 9A589)

(AB-208-AX)SCREW/WSHR M6 X 1.0 X 42.5 HEX HD. PILOT (ATTACH UPPER/LOWER INTAKE MANIFOLD).

(AB-175-HY)SCREW/WASHER M6X1.0 X 35.5MM (ATTACH 9A589 SPACER TO UPPER INTAKE MANIFOLD & THROTTLE BODY 9E926 TO SPACER 9A589)

(AB-208-AX)SCREW/WSHR M6 X 1.0 X 42.5 HEX HD. PILOT (ATTACH UPPER/LOWER INTAKE MANIFOLD).

BOLT; M8 X 43MM; ATTACHES INTAKE MANIFOLD TO CYLINDER HEAD.

M8 X 56MM (ATTACHES INTAKE MANIFOLD TO CYLINDER HEAD.

M8 X 55MM; ATTACHES INTAKE MANIFOLD TO CYLINDER HEAD.

ATTACHES WITH E9ZZ-8287-AA CLAMP TO 18599 CONNECTOR TO 9424 UPPER INTAKE MANIFOLD