8 CYL. 6.0L - DIESEL-Fuel injectors & rails - ""From 9/29/03''

10 O-RINGS PER KIT

O-RING; FOR UPPER METAL INJECTOR SLEEVE TO INJECTOR. 20.7MM OD.

FUEL REGULATOR O-RING KIT. FOR O-RING KIT WITH IPR SCREEN USE 3C3Z-9H529-A.

INJECTOR O-RING KIT

STAND PIPE ASY; HP PUMP TO FUEL RAIL. 2 PIECE DESIGN. NOW REPLACED BY 1 PIECE DESIGN 5C3Z-9A332-A. (W301387 MUST BE REMOVED FROM FUEL RAIL TO INSTALL UPDATED PART)

ONE PACKAGE CONSISTS OF 8 PIECES. ONE PIECE REQUIRED PER INJECTOR.EIGHT(8) PIECES REQUIRED PER ENGINE

REMANUFACTURED

SLEEVE; FUEL INJECTOR. ONE(1) PACKAGE CONSISTS OF 4 PIECES.EIGHT(8) PIECES REQUIRED PER ENGINE.ONE(1) REQUIRED PER INJECTOR.

ICP REGUALTOR. #1845428-C91. W301385 IS THE SEAL FOR THE SENSOR.

INTL# 1844694-C92. WISHBONE DESIGN BETWEEN OIL RAIL

O-RING FOR PLUG

PLUG; M17 X 16MM; HIGH PRESSURE OIL PUMP, FUEL FILTER & FUEL RAIL. INCLUDES O'RING 9N693. #1837644-C91.

#1838615-C1. 2.1 INCHES IN DIA. ALSO SERVICED IN 9P458 ASSY.

#1838618-C1. 34MM OD X 5MM THICK. ALSO SERVICED IN 9P458 ASSY.

#1835339-C1. 22MM OD X 2MM THICK. ALSO SERVICED IN ENGINE HIGH PRESSURE PUMP KIT 9G804

#1835350-C1. 21MM OD X 4MM THICK. ALSO SERVICED IN ENGINE HIGH PRESSURE PUMP KIT 9G804

#1837800-C1. 14MM OD X 2MM THICK. O-RING FOR ICP SENSOR

#1839033-C1. 16MM OD X 2MM THICK. ALSO SERVICED IN DIAGNOSTIC VALVE 6K702 IN OIL COOLER

14MM OD X 2MM THICK. O-RING FOR PLUG ON FUEL FILTER HOUSING. ALSO USED IN HIGH PRESSURE PUMP COVER.

COMPLETE SEAL KIT THAT ALSO COMES WITH OIL COOLER ASY. CONTAINS ALL SEALS REQUIRED TO R&R OIL COOLER.

SEAL FOR 9K024 ON H/P PUMP COVER

SEAL INSIDE FUEL FILTER HOUSING BETWEEN 9T289 & 9C166.

REMANUFACTURED OIL RAIL ASSEMBLY. ATTACHING BOLT IS W301383

ALSO SERVICED IN 9J332(WISHBONE STYLE HOSE ASSEMBLY).INTL# 1844252-C1/C2. BUSHING WITHOUT 9J278 RETAINER

BUSHING WITH RETAINER 9J278. ALSO SERVICED IN 9J332

20MM LONG

NAV ID# 1847074-C91