HEATERS-Intake manifold heater inlet tube - 10 cyl. 6.8L-E250/550 (Stripped Chassis,Cu

3/4'' HOSE X 1/2 PIPE "E" SERIES LOCATED ON LH CYL. HD AND "F" SERIES LOCATED ON RH CYL. HD-TYPE 4

Снято с производства

5/8'' HOSE X 1/2 PIPE - LOCATED ON W/PUMP,TYPE 4

Снято с производства

"90 DEG. " - 1/2'' - 14 ENG. CONN. - 5/8'' HOSE CONN,TYPE 16

Снято с производства

SCREWS INTO THE INTAKE MANIFOLD NEAR THE THERMOSTAT HOUSING. HAS 1 NIPPLE TO ATTACH TO THE 8A505.

SCREWS INTO THE INTAKE MANIFOLD NEAR THE THERMOSTAT HOUSING. HAS 1 NIPPLE TO ATTACH TO THE 8A505.

3/8 NPT X 5/8 TUBE -- AUXILIARY HEATER

Снято с производства

"45 DEG. " - 3/8'' - 18 - 5/8'' HOSE CONNECTION

Снято с производства

MEGA-TORQUE CLAMP 1 1/2''

Снято с производства

MEGA-TORQUE CLAMP 1 3/4''

MEGA-TORQUE CLAMP 2''

Снято с производства

LOWER. USE WITH 4MM 9439 GASKETS YF2Z-9439-AA/BA

UPPER

UPPER

Снято с производства

INCLUDES VALLEY STUFFER 6P013

BOLT-M6 X 1.0 X 62.5 HEX FLNG PILOT. ATTACH 9424 LWR. INTAKE MANIFOLD TO 6049 CYL. HEAD

SCREW & WASHER - M6 X 62.5 HEX FLNG. ATTACH UPR. INTAKE MANIFOLD 9424 TO LWR. INTAKE MANIFOLD 9424

STUD - M6 X 15 + M6 X 20.4 HEX FLNG. ATTACH COIL/BRKT. TO UPR. INTAKE MANIFOLD & ATTACH EVR BRACKET TO INTAKE MANIFOLD

FITTING FOR HEATED PCV COOLANT

M8 X 56MM (ATTACHES INTAKE MANIFOLD TO CYLINDER HEAD.

(AB-208-AX)SCREW/WSHR M6 X 1.0 X 42.5 HEX HD. PILOT (ATTACH UPPER/LOWER INTAKE MANIFOLD).

(AB-175-HY)SCREW/WASHER M6X1.0 X 35.5MM (ATTACH 9A589 SPACER TO UPPER INTAKE MANIFOLD & THROTTLE BODY 9E926 TO SPACER 9A589)

(AB-208-AX)SCREW/WSHR M6 X 1.0 X 42.5 HEX HD. PILOT (ATTACH UPPER/LOWER INTAKE MANIFOLD).