8 CYL. 5.4L-In-cab fuel tank - NGV

(AFT AXLE) - 37 GAL. INCLUDES STRAPS, MTG. BRACKET AND HEAT SHIELD. HAS 3/4INCH DIA. VENT PIPE.

MIDSHIP

TANK AND VALVE ASSEMBLY. 800MM(31 1/2"") LONG. 62 LITERS CAPACITY. INCLUDES 9C121 VALVE

TANK AND VALVE ASSEMBLY. 1829MM(72"")LONG. 109 LITERS. INCLUDES 9C121 VALVE

FLANGE-FUEL FILL. USED TO MOUNT 9C112 FILL VALVE

Снято с производства

O'RING-2"". ALSO SERVICED IN 9C121 FUEL TANK SOLENOID VALVE

Снято с производства

#YC28-9058-AA. AFT AUX TANK SUPPORT

Снято с производства

MOUNTS TO CROSS MEMBER FRAME

MOUNTS TO CROSS MEMBER FRAME

USE ON AFT AXLE TANK, 5 1/2'' LONG, INCLUDES WELD NUT.

Снято с производства

USE ON AFT AXLE TANK, 5 7/8'' LONG, INCLUDES WELD NUT.

Снято с производства

#F7UA 9071-AD; FRONT - MIDSHIP TANK

Снято с производства

#F7UA 9071-BC; REAR - MIDSHIP TANK

Снято с производства

#F7UA 9071-CA; LOCATED BETWEEN 2 AFT TANKS.

Снято с производства

(AU-56) SCREW - M6.3 X 1.81 X 16MM HEX FLANGE TAP

CABAR II HOSE MATERIAL WITH BONDED 9A064 CLAMP.INCLUDES EXTRA 9A064 CLAMP. ALSO SERVICED IN 9034

3/4'' I.D. X 21 7/8''

Снято с производства

10 O-RINGS PER KIT

O-RING; INJECTOR UPPER. 10 PER PACKAGE.

ALSO SERVICE DETAIL CLIP F7UZ-9A317-FA & O'RING SEAL N808861-S 9.14 X 1.78MM.

Снято с производства

THREE LINES (938/374/51MM). INCLUDES O'RING N808861-S AND CLIP F7UZ-9A317-FA.

Снято с производства

LOCATED AT END OF FUEL TANK. ALSO SERVICED IN 9002. INCLUDES 9039 O'RING, GFI#1702X1F(TANK VALVE)

GFI# P1706-80, ALSO SERVICE IN 9C121 ASSSEMBLY

Снято с производства

PLASTIC, FRAME MTD., FRONT UPPER INSIDE OF TANK

#F7UA 9K014-DA; STEEL, MIDSHIP LOWER, FRAME MOUNTED USING (5) N620481-S301 NUTS - M8 X 1.25 HEX FLANGE (AM-18-AB)

Снято с производства

UPPER REAR PORTION OF MIDSHIP FUEL TANK, ATTACHES TO LIP OF TANK.

Снято с производства

SHIELD FOR DUAL AFT AUX. TANK ASY.; REQUIRES (4) N605906-S2 BOLTS (AB-122-DA) M8 X 1.25 X 28 HEX FOR INSTALLATION.

ELECTRICAL CONNECTOR ON FUEL TANK SOLENOID VALVE

Снято с производства