4 CYL. 2.3L (140 C.I.D.)-Manifold and related parts- exhaust

SERVICE PLUG MAY DIFFER FROM ORIGINAL

SERVICE PLUG MAY DIFFER FROM ORIGINAL

Снято с производства

LH - TUBULAR STEEL

Снято с производства

RH - TUBULAR STEEL

Снято с производства

(AP-13) PLUG (SENSOR HOLE AT EXHAUST PIPE CONNECTION)-HEX. HEAD-M18 X 1.5

Снято с производства

(AW-30-F)-STUD (EXHAUST MANIFOLD TO INLET PIPE) M12 X 1 3/4''-7/16'' 14 X 50.2MM

(AW-43)-STUD (EXHAUST MANIFOLD TO CYLINDER HEAD)-M10 X M10 X 78MM (METRIC)

(MM-169-LC)-NUT (INLET PIPE TO MANIFOLD) 7/16''-14

(AI-17-B)-ELBOW (EGR TUBE TO EXHAUST MANIFOLD) 16.0 INVERTED FLARE X 1/2'' PIPE

Снято с производства

(II-49-E)-CONNECTOR (AIR TUBE TO EXHAUST MANIFOLD) 3/4'' INVERTED FLARE X 1/2'' PIPE

Снято с производства

(AB-111-EC)-BOLT (MANIFOLD TO HEAD) M10 X 1.50 X 1.50 X 55.0 HEX FLANGE

Снято с производства

(AW-61-F)-STUD (MANIFOLD TO HEAD) M10 X 1.50 X 1.50 X 84.0 HEX SHOULDER

(AW-97-G) STUD M12 X 13/4 -7/16 X 70MM-ATT 5F250 TO 9430

(MM-169-LC)-NUT (INLET PIPE TO MANIFOLD) 7/16''-14

(WW-98-AH)-STUD (EXHAUST MANIFOLD TO INLET PIPE) 7/16''-14-14 X 2'' HEX SHOULDER

Снято с производства